Error code
KitchenAid electric cooktop error code F03
KitchenAid electric cooktop error code F03: There is an internal communication error on the touch control module. What the code narrows down, what the maker publishes for it, and why the same number means something else on another KitchenAid appliance.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code F03, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
F03
There is an internal communication error on the touch control module
or call (305) 306-1328
What it narrows down to
There is an internal communication error on the touch control module
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Lit up and ignoring you The control panel is not responding
A panel that lights up and does nothing, or one where some buttons work and others never do. Before this is a repair it is worth ruling out two settings and one very ordinary condition, because between them they explain a lot of these.
- Some buttons work, others do nothing
- The display is lit and every press is ignored
- A lock symbol you did not put there
On the same appliance
What else belongs to the cooktops
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
The cooktop is too hot.
An object, liquids, or soils are putting pressure on the control panel
Is the correct cookware being used?
There is an internal communication error on the touch control module
The same digits mean different things on different equipment. Search the full code list
In more detail
About KitchenAid electric cooktop error code F03
What KitchenAid publishes for F03 on a electric cooktop
There is an internal communication error on the touch control module. That sentence is KitchenAid's own, read off its published support page for this condition on a electric cooktop rather than worked out from the outside. Everything under it is ours, written from what this equipment does in Miami kitchens.
The power cycle is a test, not a repair
The whole of what KitchenAid publishes to do about F03 on a electric cooktop is a one-minute cycle at the breaker. Do it, and read the result rather than the instruction. Cutting power clears the stored code and makes the control re-read every circuit from cold. If the condition was a one-off — a control interrupted mid-write, a reading that went out of range once — the code does not come back and there is nothing to repair.
If it comes back, the reset has told you something. The condition is live, the circuit is still reporting, and a second power cycle will not change that. From there it is a diagnosis rather than a procedure.
KitchenAid's own steps, in its order
- Power unit down by turning off the circuit breaker(s) for one (1) minute.
- Power unit up by turning on the circuit breaker(s).
- Monitor the cooktop for one (1) minute to ensure the error code does not display again.
- Verify cooktop operation.
Then what
F03 is also published for the range on this make, and it does not mean the same thing there. Read the page for the machine that is actually showing it — that is why every title in this archive names an appliance.
One more thing worth saying plainly: this code is not this badge's alone. KitchenAid shares its control platform with the other names in the same group, and the same page for F03 sits at the same address under more than one of them. That is useful rather than awkward — it means the code names the subsystem and the model number names the machine, so the plate on the door frame is half of every answer here.
The full KitchenAid code archive holds the rest, searchable. Tell us the model number and exactly what the display is showing and we will tell you what it points at before anybody is booked. We repair this equipment across Miami-Dade, Broward and Palm Beach.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards