Error code
KitchenAid dishwasher error code F9E1
KitchenAid dishwasher error code F9E1: Long Drain Filter: Remove the filter and clean it thoroughly under running water. Drain Hose: Check for a kinked, pinched, or clogged hose from the back of the dishwasher to the sink. Sink Disposer: If connected, ensure the disposer is clear and that the knockout plug was removed (for new installations). Air Gap: If used, refer to the manufacturer for instructions on removing the cap and clearing blockages. What the code narrows down, what the maker publishes for it, and why the same number means something else on another KitchenAid appliance.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code F9E1, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
F9E1
Long Drain Filter: Remove the filter and clean it thoroughly under running water. Drain Hose: Check for a kinked, pinched, or clogged hose from the back of the dishwasher to the sink. Sink Disposer: If connected, ensure the disposer is clear and that the knockout plug was removed (for new installations). Air Gap: If used, refer to the manufacturer for instructions on removing the cap and clearing blockages
or call (305) 306-1328
What it narrows down to
Long Drain Filter: Remove the filter and clean it thoroughly under running water.
What you are probably seeing
Diagnostic
From $95, credited to the repair
What it looks like from the kitchen
The symptom this code usually arrives with
A code names the subsystem; the symptom is what sent you to look at the display in the first place. That page says what it usually turns out to be, cheapest cause first.
-
Water still in the tub Dishwasher will not drain
A cycle that finishes — or stops — with water standing in the bottom of the tub. Four of the five things that cause this are outside the machine or free to clear, which is why this one is worth ten minutes before it is worth a visit.
- Standing water at the end of every cycle
- You can hear the pump trying
- It drains if you run it again
On the same appliance
What else belongs to the dishwashers
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
Control Module
Stuck Key oe Console Error
Thermistor or OWI Sensor
Heating System
Heating Error
User Interface Error, Main Control
Excessive Suds
Water Float Switch
Wash Motor Error
Fill Valve Electric Error
The same digits mean different things on different equipment. Search the full code list
In more detail
About KitchenAid dishwasher error code F9E1
What KitchenAid publishes for F9E1 on a dishwasher
Long Drain Filter: Remove the filter and clean it thoroughly under running water. Drain Hose: Check for a kinked, pinched, or clogged hose from the back of the dishwasher to the sink. Sink Disposer: If connected, ensure the disposer is clear and that the knockout plug was removed (for new installations). Air Gap: If used, refer to the manufacturer for instructions on removing the cap and clearing blockages. That sentence is KitchenAid's own, read off its published support page for this condition on a dishwasher rather than worked out from the outside. Everything under it is ours, written from what this equipment does in Miami kitchens.
F9E1 is two numbers, not one
Read it as F9 and E1. The F names the function that reported the problem; the E names what it reported. So F9E1 and F9E0 are neighbors, and F1E1 is not related to either of them despite looking almost the same on a display.
The other F9 conditions published for the dishwasher: F9E2. If your display has cycled through two of those, they are almost certainly one problem rather than two.
Worth trying yourself, in this order
These are KitchenAid's own steps for F9E1 on a dishwasher, and they are worth the five minutes: several of them end the call for nothing at all, which is why this archive is free to read before you book anything.
- Check the drain line for kinks
- If the dishwasher is not draining, check the following before resuming the cycle.
- If the dishwasher is connected to a garbage disposer, ensure that the knockout plug has been removed from the disposer's inlet.
- Check out
- Check for any food or obstructions caught in the drain or the garbage disposer. Run the disposer to clear the obstruction.
- Make sure it is routed correctly, on the correct side, inside of the frame and verify the drain hose is not kinked or clogged. A kinked or clogged hose can cause poor drainage or no drainage.
Then what
One more thing worth saying plainly: this code is not this badge's alone. KitchenAid shares its control platform with the other names in the same group, and the same page for F9E1 sits at the same address under more than one of them. That is useful rather than awkward — it means the code names the subsystem and the model number names the machine, so the plate on the door frame is half of every answer here.
The full KitchenAid code archive holds the rest, searchable. Tell us the model number and exactly what the display is showing and we will tell you what it points at before anybody is booked. We repair this equipment across Miami-Dade, Broward and Palm Beach.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards