Repair cost
KitchenAid oven and range control board repair cost
A panel that will not respond, a display showing a code that will not clear, or an appliance that came back from a power outage confused. The most expensive cooking repair short of the appliance itself, and the one most often diagnosed wrongly.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
The short version
Where this figure comes from
A starting point for built-in appliances in South Florida, published so the number is not a mystery until somebody is standing in your kitchen.
Starts at
from $265
After a diagnostic from $95, which comes off the bill when you go ahead with the work.
or call (305) 306-1328
It is not
A quote for your unit
Exact cost
Confirmed after the on-site diagnostic
Warranty
On the labor we performed
What moves it
Why two of the same job cost different amounts
These apply at the same time and in both directions. Which of them is true of your kitchen is what the on-site diagnostic settles.
-
Which board, on a platform that has several
Current cooking appliances carry more than one board with a network between them, and the code says which one is reporting. That is why this figure sits above the mainstream researched band rather than inside it, and the page would rather explain that than quietly print a bigger number.
-
Whether it is the board at all
Sensors, harnesses, latches, elements and supply problems get blamed on boards constantly. Measuring what the board is reporting on comes first, every time. It is the difference between a repair and an expensive part that changes nothing.
-
The display, which may be a separate assembly
On some appliances the display and the control are two parts. Where both have gone it is two parts; where only one has, it is worth knowing which, and that is a measurement rather than an assumption.
The work itself
What we actually do
The job behind the figure: what it involves, when a symptom points at it, and what we check first.
-
from $265 Cooking control & display repair
A code on the display, a keypad that does not answer, or an appliance that has not been the same since the power came back. On cooking appliances this maker shows plain words as well as codes — and several of them mean nothing is wrong at all.
- Codes and display words read before anything is cleared
- Documented resets tried before any part is proposed
- Keypad and control board proved as separate parts
In more detail
About KitchenAid oven and range control board repair cost
Start with the outage, because it is free
After the power comes back, a KitchenAid range or oven shows PF — a power failure message — and a flashing time of day means the same thing. That is documented behavior, not damage. And several appliances on this make will not run a timed function until the time of day has been set, which is exactly why one can look dead and be perfectly well. Set the clock. Then, if there is a code, the documented reset for several of them is to switch the appliance off at the breaker for a full minute and back on.
What we will not tell you
That a storm surge killed your control board. It is a popular explanation and we could not find a single manufacturer or regulator source connecting Florida storms to this maker's electronics — every source that says it is selling surge protection. Florida genuinely does lead the country in lightning, and hurricane-season outages are a fact of life here. What follows honestly from that is PF, a clock that needs setting, and a breaker cycle. A board that will not clear after a proper breaker cycle needs service; a board blamed on the weather without a measurement is a sale.
Why this figure is above the mainstream band
Researched market ranges put a cooking control board at roughly $150 to $300 all in on mainstream equipment. This row starts higher, and the reason is the platform rather than the badge: more than one board, a network between them, and a diagnosis that has to establish which one is reporting before anything is ordered. We would rather publish that reasoning than a number with nothing behind it.
What the figure is
A starting point and a researched market range for South Florida rather than a quote for your appliance. The exact cost is confirmed after an on-site diagnostic and agreed in writing before anything is opened.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards
Before you book
Questions about KitchenAid oven and range control board repair cost
My range says PF after the power came back.
That is a power failure message and it is documented behavior rather than damage. Set the time of day. Several functions on this make will not run until the clock is set, which is why an appliance can look dead and be perfectly well.
The panel does not respond to any button.
Try the control lock first — a press-and-hold on the button your model names — and then a full breaker cycle for one minute. Those two account for a real share of these calls and cost nothing. A panel that is still dead after both is worth a visit.
Did the storm do this?
We cannot honestly tell you that it did. There is no manufacturer or regulator source connecting storms here to this maker's electronics, and we would rather say so than sell you a story. What is documented is the power failure message and the breaker-cycle reset, and those are free to try.
Can a board be repaired instead of replaced?
Occasionally, and where it genuinely is repairable we will say so — it matters most on older appliances where a replacement board is scarce. On current platforms a replacement is faster and more predictable.
Where we do it
Across Miami-Dade, Broward, and Palm Beach
Same terms everywhere we go: an on-site diagnostic first, the price agreed in writing, and the exact figure confirmed once we have seen the unit.
Neighborhoods people ask for by name