--- title: "Dryer drum, belt & roller repair" description: "KitchenAid dryer drum, belt and roller repair — a squeal, a rumble, or a drum that has stopped turning altogether." url: "https://kitchenaidmiami.support/services/dryer-drum-belt-and-roller-repair/" date_modified: "2026-08-23" Appliance type: "Dryers" --- # KitchenAid dryer drum, belt & roller repair ### The simplest appliance in the house A vented dryer is a drum, a belt, some rollers, a motor, a heater and a way out for the air. That simplicity is why these machines last as long as they do and why a mechanical repair on one is usually good value — there is very little in there that cannot be put right. ### What actually goes wrong - **The belt**, which is a drum that will not turn with a motor that runs. - **Drum rollers and the idler pulley**, which is the noise, months ahead of the failure. - **The rear bearing and the front glides**, the other two places the drum rubs. - **The door switch and the start switch**, on a machine that will not run. - **The blower wheel**, which makes a rattling noise all its own when it cracks. ### Why noise is worth acting on Every one of these parts gives a warning, and every one of them is cheaper before it takes something else with it. A squeal is a roller; a roller left long enough is a belt; a belt that breaks at the wrong moment can mark the drum. Booking the noise is cheaper than booking the failure. ### What it costs From $185 for the drive set. The exact cost is confirmed after the on-site diagnostic and agreed with you first. What this involves Rollers, idler and belt replaced as the set they wear as Rear bearing and glides checked with them Start switch and door switch ruled out on a machine that will not run Establish whether the drum turns at all A machine that hums without turning has usually broken a belt. One that turns and squeals is rollers or the idler pulley, and it is being told months in advance. Replace what wears together Belt, rollers and idler are one system and they wear as one. Changing a belt and leaving tired rollers means doing the job twice, which is worse value for you and worse work by us. Check the front glides and the rear bearing The other two places a drum rubs. Left alone they mark the drum and eventually the clothes. The switches, if it will not start A door switch or a start switch is the cheapest cause of a dryer that does nothing, or one that stops the moment the button is released. The simplest appliance in the house A vented dryer is a drum, a belt, some rollers, a motor, a heater and a way out for the air. That simplicity is why these machines last as long as they do and why a mechanical repair on one is usually good value — there is very little in there that cannot be put right. What actually goes wrong The belt, which is a drum that will not turn with a motor that runs. Drum rollers and the idler pulley, which is the noise, months ahead of the failure. The rear bearing and the front glides, the other two places the drum rubs. The door switch and the start switch, on a machine that will not run. The blower wheel, which makes a rattling noise all its own when it cracks. Why noise is worth acting on Every one of these parts gives a warning, and every one of them is cheaper before it takes something else with it. A squeal is a roller; a roller left long enough is a belt; a belt that breaks at the wrong moment can mark the drum. Booking the noise is cheaper than booking the failure. What it costs From $185 for the drive set. The exact cost is confirmed after the on-site diagnostic and agreed with you first. ### It squeals or rumbles when it turns. Drum rollers, the idler pulley or the rear bearing — mechanical wear rather than anything electrical. On a vented dryer it is a sensible repair rather than a reason to replace the machine. Left alone it eventually becomes a belt, and then the drum does not turn at all. ### The motor runs but the drum does not move. That is a broken belt almost every time, and it is a routine repair. It is worth having the rollers and idler done at the same visit, because a belt that broke on tired rollers will break again on the same tired rollers. ### It stops the moment I let go of the start button. Usually the start switch itself or the door switch, and both are small parts. It can also be a thermal cut-out on the heating side, which is why the machine gets checked as a whole rather than just at the switch. ### Can parts still be found for a machine this old? Usually yes. These platforms were shared with other badges from the same corporate group, so belts, rollers, idlers, elements and thermostats are commonly still available. Cosmetic parts and consoles are the hard ones, and we check before promising anything. --- **[Read full article: Dryer drum, belt & roller repair](https://kitchenaidmiami.support/services/dryer-drum-belt-and-roller-repair/)**